Match the symptom to the part
| What happens | Gas | Electric |
|---|---|---|
| Oven never gets hot | Igniter glows weakly and the valve stays shut | Bake element broken, or a relay on the board |
| Preheat takes ages | Igniter wearing out | One element working, the other not |
| Cakes burn on one side | Burner flame uneven, or the probe reads wrong | Probe fault or convection fan stopped |
| Top burner just clicks | Spill under the cap, or a cracked spark electrode | Not applicable |
| A cooktop ring stays cold | Not applicable | Switch, element, or an induction power board |
Kitchens in Greater Katy
Many homes here have a wall oven with a gas cooktop, or a slide-in range, installed when the house was built, and some have outdoor kitchens with their own grills and refrigerators. Builder-grade igniters, sensors and control boards are common repairs in the first decade. Check whether the appliance is still under warranty.
Outdoor kitchens add their own wear: grills and outdoor refrigerators face humidity, heat and rain, and their parts corrode faster than indoor ones. Tell the technician if the appliance is outdoors.
Safety
For electric ranges, check the double breaker after storms or outages. Gas in this area is supplied by CenterPoint Energy; if you smell gas, do not touch switches, leave the house and call CenterPoint Energy or 911 from outside.
Questions and answers
Why is my oven slow to preheat?
On gas ovens, a weak igniter is the usual cause. The igniter must glow hot enough to open the gas valve, and as it wears, the oven takes longer to light, or never does. On electric ovens, slow preheating often means one element has failed while the other still works. A faulty temperature probe can also mislead the control. Tell the technician whether the oven is gas or electric and how long preheating now takes.
Can a wall oven be repaired in place?
Some repairs can, but many need the oven slid out of the cabinet. Wall ovens are common in Greater Katy kitchens, often paired with a gas cooktop, and reaching the wiring, the control board or some sensors means removing the oven from its opening. Mention that it is a wall oven when you call, give the brand and model, and ask whether pulling it out affects the labour price.
Why does my oven show an error code?
An error code is the control reporting a fault, usually with a temperature sensor, the door lock or the control board itself. Write the code down or photograph it before you switch anything off, because some codes clear after a reset. Check the breaker if the code appeared after a storm or power outage. Give the technician the code with the brand and model so they can narrow down the likely part before the visit.
Areas served for this repair
Katy · Fulshear · Cinco Ranch
Other repairs: Refrigerator and freezer repair · Washer and dryer repair · Dishwasher repair